Simplicity® LED Dimmers
for use with LED Drivers & Lamps
HUNT Dimming manufactures and extensive line of LED dimmers for use with many controllable LED drivers & lamps.
These LED dimmers provide linear lighting control from 100% to 1% of rated lumen output and are available in single-pole or 3-way designs for both 120V and 277V applications.
Simplicity® LED dimmers are specification-grade, preset slide wallbox dimmers for use in any premium performance application.
Compatible Drivers Include:
- Philips / Advance (Xitanium series)
- Osram Sylvania (Optotronic series)
- Zumtobel (BASYS series)
- Renaissance Lighting
- Powerbox
- Lighting Science
- Lightech
- PowerVector
Please contact our Customer Service Department for compatibilty with additional LED drivers.
The three most common dimming technologies used by LED drivers and lamps are: 0-10V, Phase-Controlled and Electronic Low-Voltage or ELV. THEY ARE EACH UNIQUE AND CANNOT BE MIXED AS THEY ARE NOT COMPATIBLE WITH EACH OTHER.
0-10V LED drivers and lamps utilize a total of four (4) wires. Two low-voltage leads are for driver control and two line voltage leads wires are for ON/OFF power control. This dimming technology for LED’s is the most common and also has the highest degree of industry standardization for compatibility between dimming controller and driver and lamp. This means that if the LED driver or lamp specifies that it can be controlled with a 0-10V LED dimmer, HUNT’s LED 0-10V products will work.
Phase-Controlled LED drivers and lamps use the same two (2) wires to power the driver or lamp and to control the light level. HUNT offers a variety of dimmers for use with these products but they must be properly matched to the products being dimmed, or they will not function properly. HUNT’s LED Phase-Controlled products do not work with all manufacturers’ Phase-Controlled products. If HUNT cannot verify that our products have been tested with a particular LED driver or lamp, it would be best to check with the driver or lamp manufacturer to see if they have tested HUNT’s products, or to purchase one dimmer and field test your application to ensure compatibility.
Electronic Low-Voltage (ELV) controlled LED drivers and lamps use the same two (2) wires to power the driver or lamp and to control the light level, but through a special dimming circuit. HUNT offers a variety of dimmers for use with these products but they must be properly matched to the products being dimmed, or they will not function properly. HUNT’s LED Electronic Low-Voltage products do not work with all manufacturers’ Electronic Low-Voltage products. If HUNT cannot verify that our products have been tested with a particular LED driver or lamp, it would be best to check with the driver or lamp manufacturer to see if they have tested HUNT’s products, or to purchase one dimmer and field test your application to ensure compatibility.
It is critical that the LED dimmer and LED driver or lamp be properly matched to each other... or the LED dimmer and driver or lamp will not function properly... and component damage may result. If you have any application questions or concerns, please contact the factory for assistance before purchasing your LED dimming system components.